GNWQ/ASQW submersible sewage pump consists of three parts: pump, cutting device, seal and motor. The motor is located at the upper part of the pump, which is a single-phase or three-phase asynchronous motor. The pump is located at the lower part of the pump, which is a spiral case structure of the flow channel impeller. Mechanical seal and skeleton oil seal are used as dynamic seal between the pump and the motor, and "O" type oil-resistant rubber seal rings are used at each fixed stop seal. Make
The QJ type submersible pump is a water pump that directly connects the motor and the water pump into the water. It is suitable for extracting groundwater from deep wells, and can also be used for water pumping projects such as rivers, reservoirs and canals. It is mainly used for irrigation of farmland and plateau mountains. The water for humans and animals can also be used for water supply and drainage in cities, factories, railways, mines and construction sites.
NL series mud pump is a single-stage single-suction vertical centrifugal pump. The main components are volute, impeller, pump seat, pump casing, support cylinder, motor seat and motor. The volute, pump seat, motor seat and impeller nut are cast iron casting, good corrosion resistance and corrosion resistance, and the processing technology is convenient.
The I-1B series stainless steel thick slurry pump is a single-screw volumetric rotary pump. The pump uses the rotation of the eccentric single-screw screw in the double spiral bushing to make the thick slurry move along the spiral groove from the suction port to the discharge port to realize the pump. Conveying function. The transmission parts of the stainless steel thick slurry pump and the pump casing that contacts the slurry are made of stainless steel and can be used for the transportation o
WQ series non-clogging mobile submersible sewage pump is suitable for discharging seriously polluted wastewater from factories, sewage drainage stations in main residential areas, water distribution system of municipal sewage treatment plants, sewage with conveyor belt particles, and sewage, as well as clean water and weak corrosive media.
GW vertical pipe sewage pump is easy to install and widely used. It can be used as a general pipe pump for pressurized water supply in high-rise buildings, and can also transport sewage containing granular fibers. Besides sewage transportation, it can also be used as a drainage pump, filtering and flushing condensation circulating pump, etc.
The YW submerged pump adopts automatic mixing device. The device produces strong stirring force with the high speed rotation of the pump shaft. The sediment in the sewage pool is stirred into suspended solids and discharged into the pump, which improves the capacity of the pump to prevent clogging and sewage discharge, reduces the sedimentation of the sewage tank, and reduces the running cost of the pump unit.
AS, AV type tearing submersible sewage pump is developed by the company using advanced German technology. This series of pumps has a tearing structure, which can tear long fibers, bags, belts, grass, cloth and other materials in the sewage. It is cracked, cut, and then discharged smoothly. It is especially suitable for conveying liquids containing hard solids and fibrous materials as well as particularly dirty, sticky and slippery liquids. The hydraulic performance of this series of sewage pump